Technical Articles

Ultra-low noise 3 axis acceleration sensor for monitoring aging infrastructure View Article

AC/DC reference board with 24V output Within industrial equipments, an AC/DC insulated power supply with a large power capacity is installed in order to operate a large load such as a motor. In addition to supplying power to the motor, the same AC/DC power supply is used to supply power to the control circuit board, etc., or a separate discrete AC/DC power supply is used. View Article

How to reduce input switching noise in the power design of a FPGA board? View Article

What is the DC-DC converter "LTC7821" that achieves high efficiency of 97% in the 240W class View Article

±12v insulated power reference board specialized for PLC and FA equipment Macnica has developed the ± 12V Isolated Power Supply Reference Board, which is Macnica's original and specialized for PLC and FA equipment. This board is recommended for PLC and FA equipment designers who need a power supply reference board that converts ± 12V switching isolated output to ± 10V with a positive and negative LDO. View Article

High-performance 3 axis MEMS sensor that can be installed with ADcmXL3021 standard mechanical screws Here we introduce the following 3 features of the high-performance 3 axis MEMS sensor ADcmXL 3021 that can be installed with standard mechanical screws, provided from Analog Devices. View Article

Realization of CBM using vibration pickup sensor VP8021-A CBM has been one of the biggest challenges facing many companies in recent years. This is especially true in the industrial machinery industry, where replacement is difficult because of the large opportunity loss in the event of failure and the high unit price.
This time, we introduce IMV's vibration pickup sensor VP8021-A, which plays an important role in realizing CBM. View Article

What are Analog Devices products with functional safety Functional safety is one of the ways to ensure an acceptable level of safety by introducing functions that ensure safety.
IEC 61508 establishes standards for the design of industrial equipment based on functional safety. Based on IEC 61508, ISO 26262 for automobiles and IEC 61131-6 for programmable controllers IEC - 6 for programmable controllers.
Other functional safety standards, such as ISO 13849 and DO178B/DO254, are not derived from IEC 61508. View Article

Electronic circuit breaker with input overvoltage protection In the case of the power supply of the receiving electronics connected to the power supply terminal, in addition to the protection by current limitation due to the failure of the load circuit, protection of overvoltage due to ringing and surge generated when the cable is connected may be required. This can be easily accomplished using LT4363. View Article

Simple electrochemical analysis! Ultra - small potentiostat EmStat Pico "We can't do electrochemical analysis without really expensive equipment." There may be many people who gave up like that thinking of a conventional potentiostat or galvanostat.
From rack to device. "EmStat pico" introduced this time is a small potentiostat module developed jointly by Analog Devices and PalmSens. View Article